TM-8812 Ultrasonic Thickness Tester

We Wont be Beaten On Price

(If you find this product advertised at a cheaper price within Australia we will beat it)

The TM-8812 Ultrasonic Thickness Tester is a handheld microprocessor-controlled ultrasonic thickness gauge specifically designed to measure the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastics, ceramics, glass, plastics including rubber and other good ultrasonic wave conductors, as long as they have parallel top and bottom surfaces. With applications in many areas of industry, the TM-8812 can perform precise measurements on various types of raw materials, components, parts and assembled machinery. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion or erosion. The TM-8812 is easy to use and, after a simple calibration to a known thickness or sound velocity, the gauge will give accurate readings to an accuracy of 0.5%. Sound velocities for 11 different materials can be pre-set and thickness readings can be stored in the memory and downloaded via the optional RS232c output.

$765.00

Delivery within Australia $20.00

All prices are inclusive of 10% GST

The microprocessor allows fast data acquisition and analysis.
This new tester features a wide measuring range, high accuracy, ease of operation, low power consumption (Four 1.5V AAA batteries), and convenient data display.
Communication with computer is avaliable through standard RS-232 port (POA)
Metal Materials: Al, Fe, Stainless Steel, Cu, Brass, Zn, Ag, Au, Sn,....
Acrylic Resin, Water Glass, ...
Other materials with known sound velocity values.

Specifications

Measuring method: Ultrasonic pulse echo
Measuring frequency: 5MHz
Measuring range: 1.20 - 200 mm or 0.047 - 7.874 inch (steel); Actual range varies with the types of material measured
Accuracy: +/- (0.5%H ± 0.1) mm
Sound velocity range: 500 - 9,000 m/s
4 digit large LCD display (in both mm and inch)
Automatic power-off after being idle for 5 minutes
Probe contact indicator
Resolution: 0.1mm or 0.001 inch
Working temperature: 0 ºC ~ +50 ºC
Communication between tester and computer via RS-232 port or USB(optional)
Size: 120mm x 62mm x 30mm (4.72 in X 2.44 in X 1.18 in)
Power supply: Battery: Four AAA alkaline batteries (6.0V)